Minigarden irrigation systems

Consistent irrigation is extremely important for healthy plant growth, which is why we have developed Minigarden irrigation systems that enable plants to be cared for properly and methodically without any effort.
Minigarden irrigation systems begin with a basic version that may be supplemented with various components, which are recommended for more demanding care.

Drip Irrigation Kit for Minigarden Vertical

This kit is prepared to irrigate up to 27 plants (i.e. 9 Minigarden Vertical modules x 3 pockets).

The irrigation system is composed of a micro-tube with an outer diameter of 6.5 mm with drip-feeders incorporated, which is placed inside each module. This tube is passed through the inner hole on the circular clips (Ø inner 9 mm) that connects the modules, with the tube being completely hidden.

Once the irrigation system has been assembled, a manual (5L) sprayer should be used, which will have to be adapted to the 1.5m tube (included) to perform the drip irrigation.

Drip Irrigation Kit for Minigarden Corner

This kit is prepared to irrigate up to 12 plants, i.e. 12 Minigarden Corner modules.

The irrigation system is composed of a micro-tube with outer diameter of 6.5 mm with drip-feeders incorporated, which is placed inside each module, passing through the rear hole Minigarden Corner module or the inner hole on the circular clip (Ø inner 9 mm) that connects the modules, with the tube being completely hidden.

Once the irrigation system has been assembled, a manual (5L) sprayer should be used, which will have to be adapted to the 1.5m tube (included) to perform the drip irrigation.

Automatic irrigation

If you’re looking for greater comfort and autonomy, Minigarden’s irrigation kits can be easily connected and programmed to the water supply network. You’ll need a control system, a compost dosage, and a pressure filter/reduction valve.